Sicherheitshinweis

ACHTUNG! Die nachfolgenden Informationen sind nicht für AnfängerInnen geeignet. Bitte mach nur weiter, wenn du dir sicher bist, was du tust. Wir übernehmen keinerlei Verantwortung falls du dein Gerät oder Daten beschädigst. Die übernehmen wir sonst auch nicht, aber hier möchten wir explizit darauf hinweisen, dass es nicht ungefährlich ist, solche Eingriffe und Änderungen vorzunehmen. Fortfahren also auf eigene Gefahr!

SiyahKernel S3-v1.5.3
Update 1.5.2 -> 1.5.3: adb from jellybean sources. removed smooth scaling from STweaks settings (it was already disabled in v1.5 but I forgot to remove the settings from customconfig.xml). touch gesture size increased to 30 (by Tungstwenty). added NFS module. some tiny TMU modifications. Added lulzactiveq governor (by robertobsc). Changed memory mapped regions’ allocation sizes (by AndreiLux). fixed orbot problem. disabled kies daemon (thanks to AndreiLux).

SiyahKernel S3-v1.5.2
Update 1.5.1 -> 1.5.2:] set ro.debuggable to 1 in default.prop to get superuser working on cm10 (supersu users doesn’t need this update).

SiyahKernel S3-v1.5.1
Update 1.5 -> 1.5.1: fixed lpm mode (charging when device is off). fixed amplification settings being reset on some conditions. some mali related changes. removed lots of unused and unnecessary code. some pegasusq changes. removed arm topology related patches.

SiyahKernel S3-v1.5
rc1 -> release: Linux 3.0.15. CGROUP_TIMER_SLACK. added a little delay before applying STweaks settings on boot to fix gpu settings not being applied. speaker amplification is added back to stweaks but not as 0-63 but as 0-6, 0 will be the the same as stock. Touch gestures by Tungstwenty (example gestures for S3). Configurable notification led behavior in STweaks (blinking or fading). gpu boost on pressing keys (hard & soft).

SiyahKernel S3-v1.5rc1
beta6 -> rc1: insecure adbd. disabled eq for speakers. re-enabled speaker tuning . removed speaker amplification and tuning level (too many people complaining about distortion after setting it to max which is not a kernel problem. so, you will have to set it manually). lots of refactorings in sound part. set swappiness to 90 (only effective if you enable zram or swap).
rc1 -> release: Linux 3.0.40

update v1.5beta5 -> beta6
beta5 -> beta6: fixed speaker amplification and notification sound clamping (was only broken in beta5). added 5th GPU step. removed resume freq completely and added gpu freq boost on touch (0-disabled, 1-jump to step2 on touch 2-jump to step3 on touch). fixed MTP problem in OSX. Testing: Eq presets for speaker (re-enabled equalizer for speakers). led brightness limit removed (cherry-picked from cm10 kernel). reverted high brightness settings (if you want higher brightness increase max gamma to a higher level)

update v1.5beta4 -> beta5
beta4 -> beta5: fixed eq reset problem with samsung stock player. some gpu related tweaks. removed speaker tuning from STweaks but it is still available for those who want to enable it (look in /sys/class/misc/scoobydoo_sound)

update v1.5beta3 -> beta4
enabled swap.
enabled zram. patched mm and android files to include android specific zram optimizations (from note kernel).
updated pegasusq to the latest version which has min_cpu lock.
added 533MHz gpu step back and also added 600, 640, 666, 700 and 800MHz step
enabled ZRAM as default with 150MB swap.
fixed mali currentlevel after resume.
enabled speaker_tuning
some autobrightness related changes (please comment on if this one or the original is better)

SiyahKernel S3-v1.5beta3
update beta2 -> beta3: adbd in lpm mode (charging while the device is off). when the device is charging in off state, limited the number of cores to 1, frequency to 200-800. Speaker amplification setting in STweaks.

SiyahKernel S3-v1.5beta2
update beta1 -> beta2: fixed fm speaker problem with dac_direct. disable hardware equalizer when the headphones are not attached to prevent distortion on the main speakers..possible fix for mtp problems on osx.

SiyahKernel S3-v1.5beta1
added (again) Entropy512's multicast filter patch to wifi driver
possible sound crackling fix. (please test and report)
added gpu frequency steps (valid ones: 54 108 160 266 275 300 333 350 440 and also added 533MHz for those who like to overclock) to STweaks interface
some auto-brightness behavior modifications (known as brightness-curve from my S2 kernel). please test this one as well and report if it is good or bad.
enabled autorooting again (supersu 0.94)
increased usb charging current limit in STweaks to 900mA for those who have USB3 ports.
added 700 and 600MHz steps for touchboost setting in STweaks

SiyahKernel S3-v1.4
updated wifi driver (bcmdhd 1.15.12 -> 1.15.15)
added graphical equalizer and some equalizer presets to STweaks
update cm10 init files to preview9
enabled kmem interface for cm10 (fixes chargecurrent settings and some other problems related with STweaks)
works on LG6 and LG8 based Samsung ROMs.

SiyahKernel S3-v1.3.9c
Update 1.3.9b -> 1.3.9c fixed charging when device is off. re-enabled autogroup.

SiyahKernel S3-v1.3.9b
Updated busybox to v1.20.2
fixed some mic problems
added notification sound/phone ring clamping while listening to music on headphones
changed some defaults. it is recommended to reset settings in STweaks and restart
added STweaks (my own /res/uci.sh frontend) to kernel. it will be autoinstalled.
added JB support (thanks to droidphile for finding the problem that I could not see)
Linux 3.0.38
Update 1.3.9 -> 1.3.9a: fixed not booting on cm10.
Update 1.3.9a -> 1.3.9b: fixed mic problem once again because of a wrong merge.

SiyahKernel S3-1.3.8
fixed volume drop on ExTweaks launch
insecure adbd as default
lots of cleanups in scripts
headphone amplification limit changed from +5dB to +6dB.
fll_tuning (known as anti-jitter) enabled as default
this version will not reset your previous extweaks settings
tested on miui
detailed wakelock statistics (thanks to tungstwenty for the patch), you should turn it on in Extweaks to see detailed statistics in betterbatterystats
added enable/disable GPU resume frequency setting. disabling it will save battery but may decrease UI responsiveness.
added touch boost level setting (or disable) to ExTweaks. default is still 800MHz.
fixed video recording problem with CM9
added mDNIe negative toggle enable/disable checkbox to ExTweaks
mDNIe sharpness tweaks (thanks to hardcore)
updated to latest source drop from Samsung (Update3)
changed packet filter settings to block multicast packets (thanks to Entropy512)
updated ramfs init files and exfat modules to LFB kernel
fixed sound enhancement settings not being applied sometimes

SiyahKernel S3-v1.3.7beta
applied AndreiLux’s mali platform rewrite (thanks to AndreiLux for removing most of the garbage code)
ported old wm8994 based sound enhancements to our wm1811 implementation from project-voodoo
added headset amplification level, stereo expansion gain, bass boost, hi-fi play, dac direct, anti-jitter and mono downmix settings to ExTweaks
added insecure/secure adbd setting in ExTweaks. default is secure.
added GPU voltage, threshold & stepcount settings in ExTweaks.
modified gpu thresholds a little
fixed notification lights not being active for some time after a restart
removed mali resume frequency and voltage settings which sets the clock to 266MHz after idle
Android logger as module
added sqlite3 binary to ramfs to be used in some optimization scripts (such as the one which will disable fastdormancy)
Enabled some commented kernel tweaks and added some CFS tweaks.
rounded cpu voltages to 25mV to have better support with existing undervolting applications.
added cfs-tweaks selection to ExTweaks that modifies granularity and latency settings. Available presets are “Samsung default”, “Linux kernel default” and “Thunderbolt script default”
added max_cpu_lock setting to ExTweaks which lets you choose the number of cores to be used in hotplugging. default is unlocked and quad-core and the other settings are triple-core, dual-core and single-core.
cherry-picked some UV_mV changes from AndreiLux’s repository which will round the voltage settings to the nearest 12.5mV step.
Linux 3.0.36
(v1.3 -> v1.3.1) fixed speaker volume reduction problem
(v1.3.1 -> v1.3.2) fixed headphone detection. fixed speaker volume reduction (again.. now it should be the same as stock level).. reverted cpu voltage roundings.
(v1.3.2 -> v1.3.3) changed headphone detection again (should fix some random reboots, hopefully) and disabled thunderbolt scripts for now.
(v1.3.3 -> v1.3.4) changed descriptions and removed some items from audio tab in ExTweaks. decreased default headphone volume slightly.added/removed some options and some defaults are changed. some cleanup in init scripts. reverted some parameters in pegasusq governor to defaults.
(v1.3.4 -> v1.3.5) fixed mic issue with Omega ROM (at least on the one that I use now, and probably with some others). make sure you power-off the device after you flash & then restart. thanks to ::indie::@XDA for giving me enough information about the differences.
(v1.3.5 -> v1.3.6) this time I am pretty sure that omega rom mic problem is fixed.
(v1.3.6 -> v1.3.7)
fixed fmradio problem with dac_direct and added it back to ExTweaks.
added fll_tuning (known as Anti-jitter) back.
added dynamic_gain back which will prevent distortion with high gimme-drums effect.
fixed system partition being mounted r/w. insecure-adbd as default.
fixed adbd being killed when ExTweaks is launched
and some other tiny changes/cleanups…

SiyahKernel S3-v1.3
applied AndreiLux’s mali platform rewrite (thanks to AndreiLux for removing most of the garbage code)
ported original Voodoo Sound implementation from project-voodoo
added headset amplification level, stereo expansion gain, bass boost, hi-fi play, dac direct, anti-jitter and mono downmix settings to ExTweaks
added insecure/secure adbd setting in ExTweaks. default is secure.
added GPU voltage, threshold & stepcount settings in ExTweaks.
modified gpu thresholds a little
fixed notification lights not being active for some time after a restart
removed mali resume frequency and voltage settings which sets the clock to 266MHz after idle
Android logger as module
added sqlite3 binary to ramfs to be used in some optimization scripts (such as the one which will disable fastdormancy)
Enabled some commented kernel tweaks and added some CFS tweaks.
rounded cpu voltages to 25mV to have better support with existing undervolting applications.
added cfs-tweaks selection to ExTweaks that modifies granularity and latency settings. Available presets are “Samsung default”, “Linux kernel default” and “Thunderbolt script default”
added max_cpu_lock setting to ExTweaks which lets you choose the number of cores to be used in hotplugging. default is unlocked and quad-core and the other settings are triple-core, dual-core and single-core.
cherry-picked some UV_mV changes from AndreiLux’s repository which will round the voltage settings to the nearest 12.5mV step.
Linux 3.0.36

SiyahKernel S3-v1.2.6
Cm9 & AOSP support with the same kernel image.
Headphone amplification in ExTweaks. Amplification level selection for both left and right channels and dac-direct settings (thanks to Supercurio for his project-voodoo implementation)
some pegasusq tweaks
removed locking to 1200MHz when the highest GPU step is used (means less heat when playing games)
Linux 3.0.35
fixed lagging and haptic feedback (1.2 -> 1.2.1)
fixed touchkey lights not turning off (1.2.1 -> 1.2.2)
fixed cpu stuck at 1200MHz for CM9 (1.2.2 -> 1.2.3)
fixed autoloading of exfat modules for cm9 (1.2.3 -> 1.2.4). you can use vold-exfat.zip (CWM flashable vold from samsung roms) to use exfat on cm9 (use at your own risk)
fixed ram usage reporting of running apps because of a missing part while merging with 3.0.35 (1.2.4 -> 1.2.5)
fixed i/o scheduler setting in ExTweaks not being applied after restart (1.2.5 -> 1.2.6)

SiyahKernel S3-v1.1
removed GPU settings from ExTweaks temporarily
removed all non-hotplugaware governors and disabled stand-hotplug
Fixed camera & gfx problems
back to old toolchain (prebuilt 4.4.3) which is safe and at least as performant
some other tiny changes to make logcat output less chatty.
fixed NTFS mounting
fixed charge-current error messages in ExTweaks

SiyahKernel S3-v1.0.1
This kernel is for Samsung Galaxy S3 only. It will not work on Galaxy S2 devices.
CPU overclocking & undervolting (100MHz-1800MHz 18-steps, UV_mV and vdd_levels interfaces)
v(r) and sio I/O schedulers
triangleaway support
GPU undervolting & overclocking (600mV-1200mV, 40MHz-800MHz)
added hotplug governor (although I think it is much worse than pegasusq, I wanted to give you at least one more alternative). it is patched to support 4 cores and it will enable/disable cores based on the load only (old conventional way, but outdated)
mDNIe negative effect with home button (today I saw that it is also possible on iPhones and I got surprised. I didn’t know when I was implementing that)
optional smooth scaling for battery life freaks and for those who wants to use/test it on S3.
autorooting
extweaks support for most of the available features
increased charging speed (optional. use extweaks to set charging current levels)
2ndcore support. although we have 4 cores you’ll be able to force single, dual, triple and quad core modes with or without hotplugging.
CIFS
proprietary exfat support for external sdcard
Autogroup

update (15/06): compiled with linaro toolchain 4.7 2012.05 and fixed extweaks profile problem.

SiyahKernel SGS3 v0.9beta
This kernel is for Samsung Galaxy S3 only. It will not work on Galaxy S2 devices.
CPU overclocking & undervolting (25MHz-1600MHz 18-steps, UV_mV and vdd_levels interfaces)
v(r) and sio I/O schedulers
triangleaway support
GPU undervolting & overclocking (600mV-1200mV, 40MHz-800MHz)
added hotplug governor (although I think it is much worse than pegasusq, I wanted to give you at least one more alternative). it is patched to support 4 cores and it will enable/disable cores based on the load only (old conventional way, but outdated)
mDNIe negative effect with home button (today I saw that it is also possible on iPhones and I got surprised. I didn’t know when I was implementing that)
optional smooth scaling for battery life freaks and for those who wants to use/test it on S3.
autorooting
extweaks support for most of the available features

SiyahKernel S3-v1.1
removed GPU settings from ExTweaks temporarily
removed all non-hotplugaware governors and disabled stand-hotplug
Fixed camera & gfx problems
back to old toolchain (prebuilt 4.4.3) which is safe and at least as performant
some other tiny changes to make logcat output less chatty.
fixed NTFS mounting
fixed charge-current error messages in ExTweaks

SiyahKernel S3-v1.2.6
Cm9 & AOSP support with the same kernel image.
Headphone amplification in ExTweaks. Amplification level selection for both left and right channels and dac-direct settings (thanks to Supercurio for his project-voodoo implementation)
some pegasusq tweaks
removed locking to 1200MHz when the highest GPU step is used (means less heat when playing games)
Linux 3.0.35
fixed lagging and haptic feedback (1.2 -> 1.2.1)
fixed touchkey lights not turning off (1.2.1 -> 1.2.2)
fixed cpu stuck at 1200MHz for CM9 (1.2.2 -> 1.2.3)
fixed autoloading of exfat modules for cm9 (1.2.3 -> 1.2.4). you can use vold-exfat.zip (CWM flashable vold from samsung roms) to use exfat on cm9 (use at your own risk)
fixed ram usage reporting of running apps because of a missing part while merging with 3.0.35 (1.2.4 -> 1.2.5)
fixed i/o scheduler setting in ExTweaks not being applied after restart (1.2.5 -> 1.2.6)

Changelog:
applied AndreiLux’s mali platform rewrite (thanks to AndreiLux for removing most of the garbage code)
ported original Voodoo Sound implementation from project-voodoo
added headset amplification level, stereo expansion gain, bass boost, hi-fi play, dac direct, anti-jitter and mono downmix settings to ExTweaks
added insecure/secure adbd setting in ExTweaks. default is secure.
added GPU voltage, threshold & stepcount settings in ExTweaks.
modified gpu thresholds a little
fixed notification lights not being active for some time after a restart
removed mali resume frequency and voltage settings which sets the clock to 266MHz after idle
Android logger as module
added sqlite3 binary to ramfs to be used in some optimization scripts (such as the one which will disable fastdormancy)
Enabled some commented kernel tweaks and added some CFS tweaks.
rounded cpu voltages to 25mV to have better support with existing undervolting applications.
added cfs-tweaks selection to ExTweaks that modifies granularity and latency settings. Available presets are “Samsung default”, “Linux kernel default” and “Thunderbolt script default”
added max_cpu_lock setting to ExTweaks which lets you choose the number of cores to be used in hotplugging. default is unlocked and quad-core and the other settings are triple-core, dual-core and single-core.
cherry-picked some UV_mV changes from AndreiLux’s repository which will round the voltage settings to the nearest 12.5mV step.
Linux 3.0.36

SiyahKernel S3-v1.3.4beta
applied AndreiLux’s mali platform rewrite (thanks to AndreiLux for removing most of the garbage code)
ported old wm8994 based sound enhancements to our wm1811 implementation from project-voodoo
added headset amplification level, stereo expansion gain, bass boost, hi-fi play, dac direct, anti-jitter and mono downmix settings to ExTweaks
added insecure/secure adbd setting in ExTweaks. default is secure.
added GPU voltage, threshold & stepcount settings in ExTweaks.
modified gpu thresholds a little
fixed notification lights not being active for some time after a restart
removed mali resume frequency and voltage settings which sets the clock to 266MHz after idle
Android logger as module
added sqlite3 binary to ramfs to be used in some optimization scripts (such as the one which will disable fastdormancy)
Enabled some commented kernel tweaks and added some CFS tweaks.
rounded cpu voltages to 25mV to have better support with existing undervolting applications.
added cfs-tweaks selection to ExTweaks that modifies granularity and latency settings. Available presets are “Samsung default”, “Linux kernel default” and “Thunderbolt script default”
added max_cpu_lock setting to ExTweaks which lets you choose the number of cores to be used in hotplugging. default is unlocked and quad-core and the other settings are triple-core, dual-core and single-core.
cherry-picked some UV_mV changes from AndreiLux’s repository which will round the voltage settings to the nearest 12.5mV step.
Linux 3.0.36
(v1.3 -> v1.3.1) fixed speaker volume reduction problem
(v1.3.1 -> v1.3.2) fixed headphone detection. fixed speaker volume reduction (again.. now it should be the same as stock level).. reverted cpu voltage roundings.
(v1.3.2 -> v1.3.3) changed headphone detection again (should fix some random reboots, hopefully) and disabled thunderbolt scripts for now.
(v1.3.3 -> v1.3.4) changed descriptions and removed some items from audio tab in ExTweaks. decreased default headphone volume slightly.added/removed some options and some defaults are changed. some cleanup in init scripts. reverted some parameters in pegasusq governor to defaults.

SiyahKernel S3-1.3.8
fixed volume drop on ExTweaks launch
insecure adbd as default
lots of cleanups in scripts
headphone amplification limit changed from +5dB to +6dB.
fll_tuning (known as anti-jitter) enabled as default
this version will not reset your previous extweaks settings
tested on miui
detailed wakelock statistics (thanks to tungstwenty for the patch), you should turn it on in Extweaks to see detailed statistics in betterbatterystats
added enable/disable GPU resume frequency setting. disabling it will save battery but may decrease UI responsiveness.
added touch boost level setting (or disable) to ExTweaks. default is still 800MHz.
fixed video recording problem with CM9
added mDNIe negative toggle enable/disable checkbox to ExTweaks
mDNIe sharpness tweaks (thanks to hardcore)
updated to latest source drop from Samsung (Update3)
changed packet filter settings to block multicast packets (thanks to Entropy512)
updated ramfs init files and exfat modules to LFB kernel
fixed sound enhancement settings not being applied sometimes

SiyahKernel S3-v1.3.9b
Updated busybox to v1.20.2
fixed some mic problems
added notification sound/phone ring clamping while listening to music on headphones
changed some defaults. it is recommended to reset settings in STweaks and restart
added STweaks (my own /res/uci.sh frontend) to kernel. it will be autoinstalled.
added JB support (thanks to droidphile for finding the problem that I could not see)
Linux 3.0.38
Update 1.3.9 -> 1.3.9a: fixed not booting on cm10.
Update 1.3.9a -> 1.3.9b: fixed mic problem once again because of a wrong merge.

SiyahKernel S3-v1.3.9c
Update 1.3.9b -> 1.3.9c fixed charging when device is off. re-enabled autogroup.

SiyahKernel S3-v1.4
updated wifi driver (bcmdhd 1.15.12 -> 1.15.15)
added graphical equalizer and some equalizer presets to STweaks
update cm10 init files to preview9
enabled kmem interface for cm10 (fixes chargecurrent settings and some other problems related with STweaks)
works on LG6 and LG8 based Samsung ROMs.

SiyahKernel S3-v1.5beta1
added (again) Entropy512′s multicast filter patch to wifi driver
possible sound crackling fix. (please test and report)
added gpu frequency steps (valid ones: 54 108 160 266 275 300 333 350 440 and also added 533MHz for those who like to overclock) to STweaks interface
some auto-brightness behavior modifications (known as brightness-curve from my S2 kernel). please test this one as well and report if it is good or bad.
enabled autorooting again (supersu 0.94)
increased usb charging current limit in STweaks to 900mA for those who have USB3 ports.
added 700 and 600MHz steps for touchboost setting in STweaks

update beta1 -> beta2: fixed fm speaker problem with dac_direct. disable hardware equalizer when the headphones are not attached to prevent distortion on the main speakers..possible fix for mtp problems on osx.

SiyahKernel S3-v1.5beta3
update beta2 -> beta3: adbd in lpm mode (charging while the device is off). when the device is charging in off state, limited the number of cores to 1, frequency to 200-800. Speaker amplification setting in STweaks.

update v1.5beta3 -> beta4
enabled swap.
enabled zram. patched mm and android files to include android specific zram optimizations (from note kernel).
updated pegasusq to the latest version which has min_cpu lock.
added 533MHz gpu step back and also added 600, 640, 666, 700 and 800MHz step
enabled ZRAM as default with 150MB swap.
fixed mali currentlevel after resume.
enabled speaker_tuning
some autobrightness related changes (please comment on if this one or the original is better)

update v1.5beta4 -> beta5
beta4 -> beta5: fixed eq reset problem with samsung stock player. some gpu related tweaks. removed speaker tuning from STweaks but it is still available for those who want to enable it (look in /sys/class/misc/scoobydoo_sound)

beta5 -> beta6: fixed speaker amplification and notification sound clamping (was only broken in beta5). added 5th GPU step. removed resume freq completely and added gpu freq boost on touch (0-disabled, 1-jump to step2 on touch 2-jump to step3 on touch). fixed MTP problem in OSX. Testing: Eq presets for speaker (re-enabled equalizer for speakers). led brightness limit removed (cherry-picked from cm10 kernel). reverted high brightness settings (if you want higher brightness increase max gamma to a higher level)

beta6 -> rc1: insecure adbd. disabled eq for speakers. re-enabled speaker tuning . removed speaker amplification and tuning level (too many people complaining about distortion after setting it to max which is not a kernel problem. so, you will have to set it manually). lots of refactorings in sound part. set swappiness to 90 (only effective if you enable zram or swap).
rc1 -> release: Linux 3.0.40

rc1 -> release: Linux 3.0.15. CGROUP_TIMER_SLACK. added a little delay before applying STweaks settings on boot to fix gpu settings not being applied. speaker amplification is added back to stweaks but not as 0-63 but as 0-6, 0 will be the the same as stock. Touch gestures by Tungstwenty (example gestures for S3). Configurable notification led behavior in STweaks (blinking or fading). gpu boost on pressing keys (hard & soft).

Update 1.5 -> 1.5.1: fixed lpm mode (charging when device is off). fixed amplification settings being reset on some conditions. some mali related changes. removed lots of unused and unnecessary code. some pegasusq changes. removed arm topology related patches.

Update 1.5.1 -> 1.5.2: set ro.debuggable to 1 in default.prop to get superuser working on cm10 (supersu users doesn’t need this update).

SiyahKernel S3-v1.5.3
Update 1.5.2 -> 1.5.3: adb from jellybean sources. removed smooth scaling from STweaks settings (it was already disabled in v1.5 but I forgot to remove the settings from customconfig.xml). touch gesture size increased to 30 (by Tungstwenty). added NFS module. some tiny TMU modifications. Added lulzactiveq governor (by robertobsc). Changed memory mapped regions’ allocation sizes (by AndreiLux). fixed orbot problem. disabled kies daemon (thanks to AndreiLux).